ΚΩΔ. 4.12.6 FR
ADEA, air curtain control
ADEA is an advanced and user friendly control for air curtains. ADEA is ready to run directly after installation on account of the pre-programmed parameters.
An outdoor sensor, room sensor and door contact govern the regulator, which adapts the heat and fan speed, according to the preset parameters, to the prevailing conditions.
In its basic design the fan speed is controlled in 3 steps, but can via a 0-10V signal, govern an external controller (ADSR54 or frequency inverter) to provide fully variable control.
A control board needs to be added, ADEAIB for internal mounting (for AD300/400 only) or ADEAEB IP55 for external mounting (for all units). Depending on the motor current, one or more units may be controlled with one control board.
An extra control board ADEAGD1 is needed to control AG, AGV, ACC and ADR air curtains. The control board also makes it possible to connect any air curtain running with ADEA to an advanced BMS system. The extra control board is mounted on the ADEAEB control board.
One ADEA is needed for each opening, but it can control several air curtains.
Integrating air curtains AD200-400 to a BMS system
BMS control - level 1
The SBMS control box is used for connecting an AD200-400 air curtain to a Building Management System. The SBMS has a 24V AC relay for on/off signals and a volt free alarm signal. Protection class IP44.
BMS control - level 2
Integrating AD200-400 air curtains to a Building Management System with ADEAEB/IB. Use the air curtain as an integral part of the buildings climate system by operating fan speed and heat output with the BMS. Includes an alarm signal for the fan motor (only AD300/400) and possibilities to guide the air curtains operations with a door contact. The level 2 solution requires 0-10V signals to control fan speed and heat output.
BMS control - level 3
Advanced integration of AD200-400 air curtains to a Building Management System with ADEAEB and ADEAGD. Use the air curtain as an integral part of the buildings climate system. Manages on/off, fan speed, and heat output operations. The level 3 solution also gives indications of current running mode: on/off, fan speed, heat output and alarm signal. Includes possibilities to guide the air curtain operations with a door contact. The level 3 solution requires 0-10 V signals to control fan speed and heat output.
For BMS control of other air curtains, please contact us.